Early Adopter's Guide to FreeBSD 5.2.1-RELEASE

The FreeBSD Release Engineering Team

$FreeBSD: src/release/doc/en_US.ISO8859-1/early-adopter/article.sgml,v 1.17 2003/12/02 05:54:35 bmah Exp $

FreeBSD is a registered trademark of Wind River Systems, Inc. This is expected to change soon.

Intel, Celeron, EtherExpress, i386, i486, Itanium, Pentium, and Xeon are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries.

Microsoft, FrontPage, MS-DOS, Outlook, Windows, Windows Media, and Windows NT are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.

Sparc, Sparc64, SPARCEngine, and UltraSPARC are trademarks of SPARC International, Inc in the United States and other countries. Products bearing SPARC trademarks are based upon architecture developed by Sun Microsystems, Inc.

Many of the designations used by manufacturers and sellers to distinguish their products are claimed as trademarks. Where those designations appear in this document, and the FreeBSD Project was aware of the trademark claim, the designations have been followed by the ``™'' or the ``®'' symbol.

This article describes the status of FreeBSD 5.2.1-RELEASE, from the standpoint of users who may be new to the 5.X series of releases or to FreeBSD in general. It presents some background information on release engineering, some highlights of new features, and some possible drawbacks that might be faced by early adopters. It also contains some of the future release engineering plans for the 4-STABLE development branch and some tips on upgrading existing systems.


1 Introduction

FreeBSD 5.X marks the first new major version of FreeBSD in over two years. Besides a number of new features, it also contains a number of major developments in the underlying system architecture. Along with these advances, however, comes a system that incorporates a tremendous amount of new and not-widely-tested code. Compared to the existing line of 4.X releases, the first few 5.X releases may have regressions in areas of stability, performance, and occasionally functionality.

For these reasons, the Release Engineering Team specifically discourages users from updating from older FreeBSD releases to 5.2.1-RELEASE unless they are aware of (and prepared to deal with) possible regressions in the newer releases. Specifically, for more conservative users, we recommend running 4.X releases (such as 4.9-RELEASE) for the near-term future. We feel that such users are probably best served by upgrading to 5.X only after a 5-STABLE development branch has been created; this may be around the time of 5.3-RELEASE.

(FreeBSD 5.X suffers from what has been described as a ``chicken and egg'' problem. The entire project has a goal of producing releases that are as stable and reliable as possible. This stability and reliability requires widespread testing, particularly of the system's newer features. However, getting a large number of users to test the system, in a practical sense, means building and distributing a release first!)

This article describes some of the issues involved in installing and running FreeBSD 5.2.1-RELEASE. We begin with a brief overview of the FreeBSD release process. We then present some of the more noteworthy new features in FreeBSD 5.2.1-RELEASE, along with some areas that may prove troublesome for unwary users. For those users choosing to remain with 4-STABLE-based releases, we give some of the short- to medium-term plans for this development branch. Finally, we present some notes on upgrading existing 4.X systems to 5.2.1-RELEASE.


2 An Overview of the FreeBSD Release Process

FreeBSD employs a model of development that relies on multiple development branches within the source code repository. The main branch is called ``CURRENT'', and is referred to in the CVS repository with the HEAD tag. New features are committed first to this branch; although this means that CURRENT is the first to see new functionality, it also means that it occasionally suffers from breakages as new features are added and debugged.

Most FreeBSD releases are made from one of several ``STABLE'' branches. Features are only added to these branches after some amount of testing in CURRENT. At the moment, only one STABLE branch is under active development; this branch is referred to as ``4-STABLE'', and all of the FreeBSD 4.X releases were based on it. This branch has the tag RELENG_4 in the CVS repository.

FreeBSD 5.0, 5.1, and 5.2 are based on the CURRENT branch. The first of these releases was made after over two years of development (prior to these, the last release from HEAD was FreeBSD 4.0, in March 2000).

At some point after the release of FreeBSD 5.0, a ``5-STABLE'' branch will be created in the FreeBSD CVS repository with the branch tag RELENG_5. The past two stable branches (3-STABLE and 4-STABLE) were created immediately after their respective ``dot-oh'' releases (3.0 and 4.0, respectively). In hindsight, this practice did not give sufficient time for either CURRENT to stabilize before the new branches were created. This in turn resulted in wasted effort porting bug fixes between branches, as well as some architectural changes that could not be ported between branches at all.

Therefore, the release engineering team will only create the 5-STABLE branch in the CVS repository after we have found a relatively stable state to use as its basis. It is likely that there will be multiple releases in the 5.X series before this happens; we estimate that the 5-STABLE branch will be created around the time of 5.3-RELEASE.

More information on FreeBSD release engineering processes can be found on the Release Engineering Web pages and in the ``FreeBSD Release Engineering'' article. Specific issues for the upcoming 5-STABLE development branch can be found in ``The Roadmap for 5-STABLE''.


3 New Features

A large attraction of FreeBSD 5.X is a number of new features. These new features and functionality generally involve large architectural changes that were not feasible to port back to the FreeBSD 4-STABLE development branch. (By contrast, many self-contained enhancements, such as new device drivers or userland utilities, have already been ported.) A brief, but not exhaustive list includes:

A more comprehensive list of new features can be found in the release notes for the various FreeBSD 5.X releases.


4 Drawbacks to Early Adoption

Along with the new features of FreeBSD 5.X come some areas that can cause problems, or at least can lead to unexpected behavior. Generally, these come from the fact that a number of features are works-in-progress. A partial list of these areas of difficulty includes:

Because a number of these drawbacks affect system stability, the release engineering team recommends that more conservative sites and users stick to releases based on the 4-STABLE branch until the 5.X series is more polished. While we believe that many initial problems with stability have been fixed, some issues with performance are still being addressed by works-in-progress. We also note that best common practices in system administration call for trying operating system upgrades in a test environment before upgrading one's production, or ``mission-critical'' systems.


5 Plans for the 4-STABLE Branch

It is important to note that even though releases are being made in the 5.X series, support for 4.X releases will continue for some time. Indeed, FreeBSD 4.8 was released two months after 5.0, in April 2003, followed by 4.9, in October 2003. Future releases from the 4-STABLE branch (if any) will depend on several factors. The most important of these is the existence and stability of the 5-STABLE branch. If CURRENT is not sufficiently stable to allow the creation of a 5-STABLE branch, this may require and permit more releases from the 4-STABLE branch. Until the last declared release on the 4-STABLE branch, new features may be merged from HEAD at the discretion of developers, subject to existing release engineering policies.

To some extent, the release engineering team (as well as the developer community as a whole) will take into account user demand for future 4-STABLE releases. This demand, however, will need to be balanced with release engineering resources (particularly developers' time, computing resources, and mirror archive space). We note that in general, the FreeBSD community (both users and developers) has shown a preference for moving forward with new features in the 5.X branch and beyond, due to the difficulty involved in backporting (and maintaining) new functionality in 4.X.

The Security Officer Team will continue to support releases made from the 4-STABLE branch in accordance with their published policies, which can be found on the Security page on the FreeBSD web site. Generally, the two most recent releases from any branch will be supported with respect to security advisories and security fixes. At its discretion, the team may support other releases for specific issues.

At this point, the release engineering team has no specific plans for future releases from the 4-STABLE development branch. It seems likely that any future releases (if any) from this branch will be lightweight, ``point'' releases. These will probably carry 4.9.X version numbers, to indicate that they are not intended to provide large amount of new functionality compared to 4.9-RELEASE. In general, these releases will emphasize security fixes, bug fixes, and device driver updates (particularly to accommodate new hardware easily supported by existing drivers). Major new features (especially those requiring infrastructure support added in 5.X) will probably not be added in these releases.


6 Notes on Upgrading from FreeBSD 4.X

For those users with existing FreeBSD systems, this section offers a few notes on upgrading a FreeBSD 4.X system to 5.X. As with any FreeBSD upgrade, it is crucial to read the release notes and the errata for the version in question, as well as src/UPDATING in the case of source upgrades.


6.1 Binary Upgrades

Probably the most straightforward approach is that of ``backup everything, reformat, reinstall, and restore everything''. This eliminates problems of incompatible or obsolete executables or configuration files polluting the new system. It allows new filesystems to be created to take advantage of new functionality (most notably, the UFS2 defaults).

As of this time, the binary upgrade option in sysinstall(8) has not been well-tested for cross-major-version upgrades. Using this feature is not recommended. In particular, a binary upgrade will leave behind a number of files that are present in FreeBSD 4.X but not in 5.X. These obsolete files may create some problems. Examples of these files include old C++ headers, programs moved to the Ports Collection, or shared libraries that have moved to support dynamically-linked root filesystem executables.

On the i386™ and pc98 platforms, a UserConfig utility exists on 4-STABLE to allow boot-time configuration of ISA devices when booting from installation media. Under FreeBSD 5.X, this functionality has been replaced in part by the device.hints(5) mechanism (it allows specifying the same parameters, but with a very different interface).

Floppy-based binary installations may require downloading a third, new floppy image holding additional device drivers in kernel modules. This drivers.flp floppy image will generally be found in the same location as the usual kern.flp and mfsroot.flp floppy images.

CDROM-based installations on the i386 architecture now use a ``no-emulation'' boot loader. This allows, among other things, the use of a GENERIC kernel, rather than the stripped-down kernel on the floppy images. In theory, any system capable of booting the Microsoft® Windows NT® 4 installation CDROMs should be able to cope with the FreeBSD 5.X CDROMs.


6.2 Source Upgrades

Reading src/UPDATING is absolutely essential. The section entitled ``To upgrade from 4.x-stable to current'' contains a step-by-step update procedure. This procedure must be followed exactly, without making use of the ``shortcuts'' that some users occasionally employ.


6.3 Common Notes

Perl has been removed from the base system, and should be installed either from a pre-built package or from the Ports Collection. Building Perl as a part of the base system created a number of difficulties which made updates problematic. The base system utilities that used Perl have either been rewritten (if still applicable) or discarded (if obsolete). sysinstall(8) will now install the Perl package as a part of most distribution sets, so most users will not notice this change.

It is generally possible to run old 4.X executables under 5.X, but this requires the compat4x distribution to be installed. Using old ports may be possible in some cases, although there are a number of known cases of backward incompatibility. As an example, the devel/gnomevfs2, mail/postfix, and security/cfs ports need to be recompiled due to changes in the statfs structure.

When installing or upgrading over the top of an existing 4-STABLE-based system, it is extremely important to clear out old header files in /usr/include. Renaming or moving this directory before a binary installation or an installworld is generally sufficient. If this step is not taken, confusion may result (especially with C++ programs) as the compiler may wind up using a mixture of obsolete and current header files.

MAKEDEV is no longer available, nor is it required. FreeBSD 5.X uses a device filesystem, which automatically creates device nodes on demand. For more information, please see devfs(5).

UFS2 is the default on-disk format for file systems created using newfs(8). For all platforms except pc98, it is also the default for file systems created using the disk labeling screen within sysinstall(8). Because FreeBSD 4.X only understands UFS1 (not UFS2), disk partitions that need to be accessed by both 5.X and 4.X must be created with UFS1. This can be specified using the -O1 option to newfs(8), or on the disk labeling screen in sysinstall(8). This situation most often arises with a a single machine that dual-boots FreeBSD 4.X and FreeBSD 5.X. Note that there is no way to convert file systems between the two on-disk formats (other than backing up, re-creating the file system, and restoring).


7 Summary

While FreeBSD 5.2.1-RELEASE contains a number of new and exciting features, it may not be suitable for all users at this time. In this document, we presented some background on release engineering, some of the more notable new features of the 5.X series, and some drawbacks to early adoption. We also presented some future plans for the 4-STABLE development branch and some tips on upgrading for early adopters.


This file, and other release-related documents, can be downloaded from ftp://ftp.FreeBSD.org/.

For questions about FreeBSD, read the documentation before contacting <questions@FreeBSD.org>.

For questions about this documentation, e-mail <doc@FreeBSD.org>.